Characteristic of the machine
1. The film-coated material is installed on the material rack of hydraulic expansion frequency conversion speed control, controlled by the photoelectric switch, and sent to the correction vision leveling through the feed wheel, the correction vision is synchronously driven up and down, and there is a worm gear to adjust the leveling accuracy. After the material is leveled, the film is collected by the roll film and sent to the punching machine for punching.
2. It is suitable for the correction of aluminum products and backlight boards.
3. Suitable for LCD TV panels, TFT, LCD, notebook computer panels.
4. It is an ideal equipment for optoelectronic production.
Specification
| Model |
GLFT-400 |
GLFT-500 |
GLFT-600 |
| Maximum width |
mm |
400 |
500 |
600 |
| Material width |
mm |
|
| Motor |
HP |
|
| Power supply |
|
|
| Inner diameter of coil |
mm |
|
| Coil outer diameter |
mm |
|
| Maximum material weight |
kg |
|
| Expansion method |
|
|
| Induction method |
|
|
| Speed mode |
|
|
| Correction roller |
mm |
∅50×7 ∅50×8 |
